Photo: European Automation
Jonathan Wilkins from European Automation lists the five things that can go wrong with inverters.
Inverters, drives, VSDs, variable speed drives, variable frequency drives – the category of products used to control an electric motor’s speed and thus reduce energy usage in a variable speed application has more names than Prince. Although, I suppose when you think about it, he only has three if you include his decision in 1993 to become known by a symbol instead of a word.
Capacitor wear – The first reason for inverter failure is electro-mechanical wear on capacitors. Inverters rely on capacitors to provide a smooth power output at varying levels of current. However, electrolytic capacitors have a limited lifespan and age faster than dry components. This in itself can be a cause of inverter failure.
Capacitors are also extremely temperature-sensitive. Temperatures over the stated operating temperature (often caused by high current) can reduce the life of the component. However, as the electrolytes evaporate faster at higher temperatures, capacitor life increases when they are run at lower-than-operating temperature.
Happily, keeping a consistent maintenance regime and regularly replacing capacitors avoids most problems that failed capacitors can cause.
Overuse – Using inverters beyond their operating limit, either by choice or due to oversight or lack of knowledge, can contribute to inverter bridge failure. Using any component at a rating higher than its operating limit will decrease its lifespan and lead to failure, so avoiding this issue simply comes down to checking that all inverters are being run correctly.
Over- and under-voltage – The next two issues that can cause inverter failure are over-current and over-voltage. If either current or voltage increases to a level that the inverter isn’t rated for, it can cause damage to components in the device, most frequently the inverter bridge. Often, this damage will be caused by the excess heat generated by the spike in voltage or current.
Over-current can be avoided with fuses or circuit breakers, but avoiding over-voltage can be tricky. Sometimes, voltage spikes are manmade, but they can also be caused by lightning or solar flares that are difficult to avoid if, like us, you live on planet Earth.
Ultrasonic vibrations – The final problem on the list is one that contributes to the mechanical stress placed on an inverter. Ultrasonic vibrations originating in the cores of inductive components cause friction, adding to the unwanted heat generated by the device and further damaging components in the inverter.
Jonathan Wilkins is marketing manager of European Automation. This is a personal blog and views expressed are his own.
© FoodBev Media Ltd 2019