Valve systems used in the past for conventional piping are designed so that the inlet to the valve and the outlet from the valve are at one level. Inside the valve, the fluid flow is conducted through a seat, which requires redirecting the fluid three times.
This construction inevitably causes flow losses in the valve that negatively affect the Kv value (flow coefficient for a valve) – a factor that must be taken into account when selecting and dimensioning a valve.
In the new, modular basic body, the inlet level and outlet level are separate. Since the fluid flow now only has to be redirected once through 180?, this increases the flow coefficient.
The concept was developed under the premise of ‘mass customisation’, so that it also allows the cost-effective production of customised solutions in small batches.
In this case, several valve bodies can be joined to form a block using orbital welding technology. The result is a strong, compact block that can receive valve actuators and peripheral items direct to their own ports.
The bodies can be combined with standard Bürkert valve actuator heads, which in turn can be used together with a position indicator or ‘positioner’.
In addition, it’s possible to integrate sensors for measuring flow rate, temperature and pressure. This solution is extremely flexible with respect to the connecting threads and connecting technology, so that it can be adapted to the requirements of each respective application.
© FoodBev Media Ltd 2024